Hydro Jetting & Rooter Services
Some clogs need more than a cable to actually clear. Hydro jetting scours the whole pipe wall, not just a path through the middle.
24/7
Emergency service
Same Day
Most repairs
Licensed
& fully insured
Upfront
Pricing, no surprises
Call (877) 717-8383 for 24 hour service.
How Hydro Jetting Cleans a Pipe
Hydro jetting sends water down a line at very high pressure through a nozzle that sprays forward and backward as it travels. The backward spray pulls the nozzle through the pipe while scouring grease, scale, sludge and root hair off the interior wall. By the time it exits, the pipe is clean on all sides, not just punched through the center the way cabling leaves it.
That difference matters because a cabled pipe still has a coating of grease or scale on the walls, giving the next clog something to grab onto almost immediately. A jetted pipe is close to bare, so it takes much longer to build back up to the point of clogging again.
Rooter Service and Cabling
Rooter service, sometimes called snaking, uses a rotating steel cable with a cutting head run down the pipe to break through a blockage. It's the fastest and least expensive way to open a blocked drain, and for a simple hair clog or one-time obstruction it's usually all that's needed.
The limit of cabling is that it opens a channel through the clog rather than cleaning the pipe. On a line with heavy grease or an active root problem, a cabled drain often slows back down within weeks because material left on the walls keeps catching debris. We'll tell you plainly whether cabling is enough or jetting is the smarter long-term move.
When Jetting Is the Right Call
Jetting earns its cost on lines that clog often, lines carrying heavy grease from a kitchen, and sewer lines dealing with root intrusion. If a drain has been snaked three times in a year, jetting is almost always the fix that breaks the cycle instead of buying a few more weeks.
- Recurring clogs in the same drain or sewer line
- Grease buildup from kitchen and restaurant drains
- Tree root intrusion in a sewer lateral
- Slow drainage across multiple fixtures at once
- Preparing a pipe for camera inspection or lining
- Commercial main lines with years of buildup
Root Intrusion in Sewer Lines
How Roots Get In
Roots enter through small cracks and loose joints, common in older clay or cast iron pipe in this area. Once inside, they form a dense mat that catches paper, wipes and grease, and a slow drain can turn into a total blockage without much warning.
Stopping Repeat Blockages
Jetting cuts through the root mass and clears it from the pipe wall far more thoroughly than a cable. If roots keep returning in the same spot, the crack or joint letting them in is still open, and a camera inspection can find it so we can discuss spot repair or lining.
What Affects the Price of a Jetting Job
Pricing depends on the length and diameter of the line, how it's accessed, and how much material has built up inside it. A short residential kitchen line is a quick job. A long commercial main loaded with years of grease takes longer and sometimes a follow-up camera check to confirm it's fully clear. We inspect first and give you a price before starting, and mention a follow-up camera check as an option rather than adding it without asking.
Frequently Asked Questions
Is hydro jetting safe for old pipes?+
It's safe for most materials including cast iron, PVC and clay, but a pipe that's already cracked, corroded through, or structurally failing can be damaged by the pressure. We look at the line, and camera it first if there's any doubt, before jetting an older or questionable pipe.
How often should a restaurant grease line be jetted?+
Most commercial kitchens need grease lines jetted every three to six months, depending on volume and how well the grease trap is maintained. A line that clogs sooner usually needs a shorter cleaning cycle or a look at whether the trap is undersized. We can set up a recurring schedule.
What is the difference between snaking and hydro jetting?+
Snaking uses a rotating cable to punch a hole through a clog and reopen the pipe quickly. Hydro jetting uses high pressure water to scour the entire wall clean, removing grease, scale and root hair rather than just clearing a path. Jetting costs more but lasts longer on lines with recurring buildup.
Can hydro jetting remove tree roots from a sewer line?+
Yes, it's one of the most effective ways to cut through and clear root intrusion. High pressure water breaks apart the root mass and flushes it out rather than leaving fragments behind. If roots keep returning in the same spot, the entry point should be inspected and repaired.
How long does a hydro jetting service take?+
A typical residential line takes about one to two hours, while longer or heavily blocked commercial and sewer lines can take longer. The exact time depends on pipe length, access, and how much grease, scale or roots have built up. We give a time estimate with the price before starting.
Contact Us Today!
If a drain keeps clogging no matter how many times it's been snaked, jetting is usually what finally fixes it.
Call Jersey City Plumbing Heating & Cooling at (877) 717-8383 to schedule service.